can clip v170

can clip v170
Welcome to eobdtool

2015年8月27日星期四

Free Download Renault Pin Code Reader Software

You should always ensure that the radio PIN CODE number is recorded by your Renault Dealership. If your pin code is unknown, you will need to contact the Service Department of an authorized Renault Dealer who can arrange to obtain the code. A fee may be charged for this service.
What is you have not record your pin code? obdtool.co.uk here offer pin code software download for both old and new Renault vehicle models.
Renault PIN Codereading Key programmer works for Renault cars from 1999-2003 which is K Line. Renault Explorer works for Renault car after 2003 which is CAN line.
Software Language: EnglishOperating system: Windows XP O/S
Function:
Read immobilizer PIN code and Key programming on Renault Megane and Megane Scenic modules with UCBIC (BSI) module from 1999 to 2003 year via OBD II.
Support vehicle model:
Renault Megane & Scenic (1999-2003) 8 digits PIN code reading via OBDII
Renault Megane – 1999 to 2003
Renault Megane Scenic – 1999 to 2003
Function:
Renault Explorer software allows you to add a blank key or card for many of Renault cars after 2003 via OBD2 socket. You can also change VIN number in UCH module (immobilizer). For example, if your UCH module was previously used on another car.
Computer system: Windows XP O/S
Supported models (Renault and Dacia):
Clio II Ph2/3, 2002-2006
Espace IV, 2003-2006
Espace IV Ph2, 2006+
Kangoo MUX Ph2, 2002-2007
Laguna II, 2000-2005
Laguna II Ph2, 2005-2007
Logan, 2004-2008 – New!!!
Logan Ph2, 2008+ – New!!!
Master Ph2, 2002-2006
Master Ph3, 2007+ – New!!!
Megane II, 2003-2006
Megane II Ph2, 2007+
Sandero, 2008+ – New!!!
Scenic II, 2003+
Scenic II Ph2, 2007+
Solenza, 2003-2005 – New!!!
Trafic II, 2002-2006
Trafic II Ph2, 2007+ – New!!!
Twingo Ph2, 2002-2007 – New!!!
Velsatis, 2002+
Velsatis Ph2, 2006+

2015 Newest CAN Clip V151 for Renault Diagnosis and Programming with Multi-languages:





2015年8月13日星期四

renault can clip no sensor detected

I got one Renault Can Clip from obdtool.co.uk, when I use it, I always get an error message reading: No Sensor Detected, check the sensor connections and ensure that the supply to the vehicle is correct, then try again.




Solution:
Finally I got answer from their engineer. There are two options to do:

1) install IE8,

2) install older version.

About the detailed installation and diagnostic, the video can be very helpful: http://www.eobdtool.co.uk/wholesale/renault-can-clip-diagnostic-interface.html after open this link, click Video to watch or contact the customer service.

Renault CAN Clip Review

1.by Antonio , Jun 2, 2015
Hello.
Can Renault Can Clip reprogram the target (Key) of the scenic?
I hope your reply

Reply #1 by Summer  Jun 3, 2015
Dear friend,

Nice day!

Thanks for your interest in our product.

This Renault CAN Clip can't program keys, it is for diagnose.

Regards,

Summer


2.by Mr.placido hernande , Apr 10, 2015
The quality is very good ,i have use this tool about half month ,no problem ,works stable

3.by Mr.Jason lord , Apr 10, 2015
this scanner has been more than sufficient
 
4.by Mr.Frank , Apr 10, 2015
Can this tool work with my Renault scenic 2001?

Reply #1 by Cindy  Apr 10, 2015
Hello sir,

Thanks for your visit.

Yes, it support, you can have a try.

Regards,

Cindy
 
5.by Fasel chris , Apr 8, 2015
What warranty do your guys offer?

Reply #1 by Marshall  Apr 8, 2015
Dear sir,

we offer one year warranty

regards
marshall
 
6.by Pietro roscigno , Apr 5, 2015
Che tempo ci. Vuole per arrivare diagnosi renault v146(articolo no.sp19-b) prezzo complessivo con spedizione ,verso Napoli.grazie
 
7.by MAX AUTO , Mar 23, 2015
What can I do with this error "please contact the SPX helpline" ?

Reply #1 by Marshall  Mar 23, 2015
Dear sir

this is your system problem,you need change to XP system SP3

regards
marshall

8.by Fabio Uitursl , Dec 30, 2014
Can can clip work for my 2010 Renault Scenic III (JZQN type) electrics rear brakes?

Reply #1 by Marshall  Dec 30, 2014
sorry,it cannot do

regards
marshall
 
9.by Mr.Lyle , Dec 30, 2014
When I try to program with Renault CAN Clip, no communication, what's the problem?

Reply #1 by Cindy  Dec 30, 2014
Dear sir,

Thanks for your visit.

I am sorry Renault CAN Clip we supply only support diagnosis, not support programming.

Hope you can understand.

Regards,

Cindy
 
10.by Mr.Norton , Dec 23, 2014
Does it support K- LINE protocol ?

Reply #1 by Cindy  Dec 23, 2014
Dear sir,

Thanks for your visit.

I am sorry it can't support K- LINE protocol.

It supports CAN protocol.

Regards,

Cindy

11.by Mr.Luis Tomé , May 20, 2014
hello what is the diferences in A and B versions in renault can clip

Reply #1 by Marshall  May 20, 2014
dear sir

thanks for your mail

for function they are same,i advise you buy B version now,as A version is short out of stock

have a nice day!
marshall

More reviews:2015 Newest Renault CAN Clip V151 Diagnosis and Programming with Multi-languages

All About Renault CAN Clip V151 Diagnostic Interface

1.renault can clip iso problem (Renault CAN CLIP ISO no communication error fixed)

2.renault can clip forum (Renault CAN Clip forum (Top three site))

3.can clip v151 installation (V151 Renault CAN Clip software installation step by step)

4.renault clip latest software (Renault can clip v151)

5.renault can clip review

6.renault can clip no sensor detected

2015 Newest Renault CAN Clip V153 for Renault Diagnosis and Programming with Multi-languages:


Renault CAN Clip forum (Top three site)

1.http://www.renaultforums.co.uk/

2.https://www.renault.co.uk/

3.http://meganeownersclub.co.uk/forum/

2015 Newest Renault CAN Clip V151 for Renault Diagnosis and Programming with Multi-languages:



Renault CAN CLIP ISO no communication error fixed

Some Renault CAN CLIP diagnostic tool users reported that they had ISO communication error when using the device. Here is the proper solution provided. 
Problem:
1) When I connect the Renault CAN Clip to the OBD diagnostic socket and with PC via USB port, it gave me just 2 indicators, but the green ISO indicator does not flash, and no communication with the probe. 
2) I first installed the CAN CLIP software on my Dell Win XP SP3 laptop, Software installation went ok, so did registration. Then I connected Can Clip interface to laptop and to car. Computer found USB device and driver were installed. Then second USB device and again, driver were installed. Then no more USB devices were found. I tried all other USB ports in laptop with same result. I uninstalled Can Clip software and re-installed it on another laptop with same result.
Possible reason:
1)Driver issue 
2)Hardware problem 

Solution:
1) Driver issue 
You need to copy all the CAN CLIP drivers in a directory.

JCAEIso.sys
JCAECI.sys
jcaeci.inf
JCAECan.sys
drvbck.pdb

After that allow the hardware wizard to find these automatically. You have to do it for each driver. (About 4-5 times). When you plug your probe, do you hear a noise like "ding dong" If the driver has not been fully installed, the only read light flashes. 
Follow the can clip v151 software installation video to install the software correctly:
During this procedure make sure your hardware connected to OBD socket of a car.
If these procedures do not work, your Renault CAN CLIP device is defected. 
2)Hardware issue 
You probably have bad flash chip or bad soldering, or bad oscillator, or, you name it of your clone Renault CAN CLIP. 
There is one 32K oscillator on each of the CAN and ISO firmware boards.
Some Renault CAN CLIP users have tested the fault where the green ISO LED would not light and the CLIP cable would not communicate with the vehicle. Changing this oscillator fixed the problem. They sell for around $4 on Ebay.
2015 Newest CAN Clip V151 for Renault Diagnosis and Programming with Multi-languages

Renault CAN CLIP V151 warning Unable to launch CLIP application

Renault CANCLIP V151 diagnostic software is well installed on Windows XP SP3 operating system. The Renault CLIP interface is well connected to computer and vehicle with all ISO and CAN indicators flashed, but trying to diagnose cars, the software reported two errors:
(Error screenshots taken below)

1)Perdida de la comunicacion con el calculador
Verificar
Que el contacta este puesto
La conexion de cable OBD
Validar para relanzar la comunicacion

Loss of communication with the computer
Check
That this position contact
OBD cable connection
Validate to relaunch communication






2)CLIP-warning
Unable to launch CLIP application
Please make sure it is not already running or reboot your diagnostic station



Solution:

1Re-install the CAN CLIP V151 software
Download 2015 Renault CAN CLIP 151 torrent here:

2If still does not work, change another laptop running Win XP

Free download Renault CAN CLIP V151 torrent directly

Description:

Renault CAN CLIP–A tool for the diagnosis and maintenance of vehicles Renault and Dacia. Allows a complete diagnosis of the computer cars (engine-injector, automatic transmission, ABS + ESP, airbags, climate control, xenon staff, TSKBES, dashboard)


Year / Date of Release: 2015
Version: V151
System Requirements: Microsoft Windows Win XP (no anti-virus sw)
Multilanguage:
English,German,Brazil,Danish,Spanish,Finnish,French,Italian,Norwegian,Dutch,Portuguese,Romania,Swedish
Two download links:
1.Renault CAN CLIP v151 Multilanguage 2015 Torrent
Renault CAN CLiP registration Patch V3.0 free download
2.Download Renault CAN CLIP V151 torrent here

Best Renault CAN CLIP V151 Gold PCB with AN21355SC Chip

2015 Renault CAN Clip Diagnostic Interface V151 with Gold PCB and AN21355SC Chip is available in obdtool.co.uk. The top quality Renault CLIP designed with 2pcs CYPRESS AN2135/2136SC chip. Following is the PCB and software display.

Software version: V151
Language: French, English, German, Brazil, Danish, Spanish, Finnish, Italian, Norwegian, Dutch, Portuguese, Romania, Sweden
Update: via CD



Renault CAN CLIP 151 Gold PCB display:









Related document:

Renault CAN Clip V151 oftware set up guide:



How CAN CLIP V151 Interface Recode 2006 Renault Trafic Injector ECU

2015 Good Quality Renault CAN CLIP V151 is a best-sold Renault diagnostic tool that supports multi-language, and multi-function including automatically test computers, airbag test and reprogramming for all Renault models.

Here show you how to re-flash / re-code Injector ECU on Renault Trafic 1.9 TDI 2006.

Preparation:

2. A laptop/PC running with Windows XP;

How to re-flash Renault injector ECU with CAN CLIP:

1. Install Renault CAN Clip diagnostic software;

Renault CAN Clip V151 Software Installation Video:

2. Connect CAN CLIP interface with vehicle via OBD socket;
Select the reprogramming page;

3. Obtain the VIN of the vehicle automatically;
Select the Reprogramming button;
Come to SELECT THE COMPUTER TO BE PROGRAMMED menu;
Click SELECTION and then Validate;
4. Confirm the information displayed, enter the Repair Order Number and the vehicle Technical Specification code is required;
Click Validate;
5. Click OK to accept the system re-programming notice;
Then check the battery voltage.

Select programming Mode:
–Using RENAULT NET;
–Using CD-ROM;
Select CD-ROM button;
6. Select the number for the software to download depending on the recorded operation commons;
Next confirm;
Click Software reference and press Validate.

7. Enter vehicle After-sales reprogramming code (Outcode) manually, press Validate.
8. File is downloading, no operation on the vehicle or on the tool;
Wait until the procedure is complete (This procedure will last for 5 minutes);
Then return to the home page and save result;

Exit the Renault CAN Clip software program.

(Solved) Renault Trafic 2012 get engine management light on

Car model and year:
Renault Trafic 2012, 2.0 DCI m9r engine.I purchased it from auction damaged (on the side a little on the front) ex company fleet vehicle onon 87k miles.

Car trouble:
On the dash which says CHECK INJECTION! And CHECK EMISSIONS! With engine management light on. If i erase the codes they come back. The injection one does pretty quickly but the emissions one takes a few minutes more.

Tools I use:
Renault CAN CLIP V151, I bought from obdtool.co.uk at €130 with shipping cost


Got fault code using Renault CAN clip V151
F064 (engine immob light circuit??)
DF1360 (EGR coolant pump 2 control circuit)
DF1359 (FIRST EGR WATER PUMP CONTROL CIRCUIT)

My analysis and speculation
Van had burst its rad in the collision so it had lost all its coolant. I was worried the driver at the time drove it on a empty coolant damaging HG and allowing water to gush into the egr cooler...etc..etc. But looking at when the fault occurred the driver seems to have driven just 2KM after the fault arised. The van has since only done that 2km. I've since fixed the radiator and as i say runs perfectly no other issues other than the damn errors on the dash.

Solution:

Clean the EGR and also the pipe that connects to it at 87k its probably due a clean. 

Get Renault CAN Clip V151 to fix airbag light

Renault Clio had been airbag on for about 6 months, but mot next week meant I had to sort this one out. Tried the under seat cable trick, no joy. Checked the ECU and there was some sign of liquid but not in the ECU itself. Took it to a garage for diagnosis and they use Renault Can Clip V151 cleared the faults (25 quid), only 2 errors remaining were these:

B1036: passenger side impact sensor
B1035: driver side impact sensor

Turns out this is just a little plastic unit bolted underneath the seat (directly below door) with a cable connected. I went to the scrappy and got 2 of these (10 quid each), replaced old with new in 10 minutes (unhooked battery first) and the lights went out straight away, no need to do a further reset or anything.

My advice here would be if sorting the cables under the seat doesnt fix this issue, get it diagnosed. In my case I was ready to buy a whole new ECU, turns out that wouldn’t have helped at all.


Anyways, hope this info helps someone, all the best!

More About CAN Clip: 2015 Newest CAN Clip V151 for Renault Diagnosis and Programming with Multi-languages


Renault 12pin pinouts


Pin
Number Pin
Name Description (may be empty)

1  K-Line Automatic transmission diagnostic(AD4)
2  GND 6 +12V Accumulator
7  K-Line or (MIL) Malfunction Indicator Lamp (some old models (Engine diagnostic (Siemens/Bendix/Renix SPI/MPI)
9  K-line or Undirectional (only TX) diagnostic line at 62500bps with open collector (some old models) Engine diagnostic (Siemens/Bendix/Renix SPI/MPI)
10  L-Line Engine diagnostic (Fenix 5, Magneti Marelli 06R, Motronic M4.4.2)
11  K-Line Engine diagnostic (Fenix 5, Magneti Marelli 06R, Motronic M4.4.2), ABS, Airbag




Buy Renault 12 pin to OBD2 Female Connector Adapter OBD B 8 free shipping at

Buy best quality Renault Can Clip V151 at:



2015年8月12日星期三

V151 Renault CAN Clip software installation step by step

Good news!!! Renault CAN Clip diagnostic scan tool interface has newly released to V151 version (Aug. 12th). The newest version adds new vehicle XBA model.


Software version: V151

Multi-Language: English, German, Brazil, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romania, Swedish
Operating system: Windows XP SP2/SP3


How to update Renault CAN Clip software to V151?

Renault CAN CLIP V151 software installation video instruction:
https://www.youtube.com/watch?v=ZQj8mTWa_w8


1) For those who need to update previus version V145, V149 to V151, please order Item No: SP19-S Renault CAN Clip V151 software in our website and install it to run an upgrade.

2) For those who want to buy new V151 Renault clip interface, you need to purchase SP19-S V151 software as well.


How to install Renault CAN Clip V151 diagnostic software?

Main steps:
1) Install CAN CLIP Patch & Driver
2) Register & Crack Renault CLIP
3) Connect Renault Can Clip interface
4) Computer Test
5) Diagnose vehicles

Detail instructions:

1) Install Patch & Driver

Insert CD to computer
Open My Computer
Open Renault CAN CLIP V151 (E:) DVD

Open “Activation (Patch V3)” folder

Merge “Crack Renault CLIP”
Click Yes to accept registry editor prompt

Click OK
Open Setup on folder

Click on FIRST INSTALLATION

Accept license agreement

Click Next
Select your country, click Next

Select software language, click Next

Select manufacturer to install, click Next

Click Next
Click Next
Agree license agreement
Click Next
Do not change destination directory
Click “Install Now”

Click Finish when software setup is installed completely.
Restart the computer

2) Register & Crack Renault CAN CLIP V151

CLIP V151 FIRST INSTALLATION completed, click Finish

Right click CLIP software on desktop>> Find Target>> find the “RSRWin” file, cut and paste it to desktop

Open My Computer
Open Renault CAN CLIP V151 (E:) DVD
Open “Activation (Patch V3)” folder
Copy “RSRWin” file and paste it to “Application” folder 


Open “RSRWin” file on Application folder

Tick “I understand and accept the license contract above”
Then click “Register me now”

Click No
Enter register security code
Press Confirm button

Click OK
Open Application folder
Cut “RSRWin” file from desktop and replace “RSRWin” file in Application folder





3) Connect Renault CAN Clip interface

Connect Renault CAN Clip interface with computer via COM Port
Wait the system to detect the hardware wizard
Open My Computer>>Device Manager>> Bosch Automotive Service Solutions Device>> 1B-Alliance Vehicle Communication Interface, to check well communication is built


4) Computer Test

Open CLIP software on desktop
Complete vehicle information, VIN, vehicle type, Engine type etc, then click “COMPUTER TEST” button

Unblock the windows security alert
Select PETROL INJECTION
Select FAULTS TEST
Check software information etc
Exit CLIP V151 software

5) Diagnose vehicles with Renault CLIP
Open CLIP software on desktop
Complete vehicle information
Click OK when system prompts “COMFIGURATION PROBLEM” windows
Select “Information” tab
Select valid systems, press Continue
Read & erase fault codes, continue perform other functions