V168 Renault can
clip diagnostic software has been tested to work without any issue!
Purpose: This
write-up explains how RenaultCLiP V168 works successfully!
Overview: About Renault Can Clip. You do not need to
postpone your trip because of reprogramming or airbag issues that your Renault
car is facing. With Renault CAN clip, you can scan and diagnose different
problems that you car may have before a long trip.
Test scope:
- In Scope
- Out of Scope
A functionality verification which needs
connectivity to a third party application cannot be tested, as the connectivity
could not be established due to some technical limitations. This section should
be clearly documented, else it will be assumed that Testing covered all areas
of the application.
a) In Scope
Functional Testing for the following modules are in Scope of Testing
Functional Testing for the following modules are in Scope of Testing
·
Functions tested: OBDII diagnosis, ECU reprogramming.
·
Systems
tested: ENGINE, automatic gear shifting, Air conditioning system,
SRS, ABS, ASR, MPL, GM, IMMO, KEYZESS GO system, OBD-I I, etc.
b) Out of Scope
Performance Testing was not done for this application.
Performance Testing was not done for this application.
·
Renault can clip key programming
·
Renault can clip ECU programming
Note: you can try FVDI2Renault or Renault-COM
for programming.
Metrics:
A) No. of test cases planned vs executed
b) No. of test cases passed/failed
b) No. of test cases passed/failed
Test cases planed
|
Test cases executed
|
TCs passed
|
TCs failed
|
80
|
70
|
97%
|
3%
|
TCs passed vs TCs failed
Test
environment and tools:
The CLIP program
isn’t tested with the genuine renault clip diagnostic tool but the china clone!
Renault clip 168
download:
Renault can clip
168 software: tested OK
Renault can clip
diagnostic interface: tested OK
Note: Renault can
clip diagnostic tool buying guide:
the HQ Renault can
clip comes with a chip- CYPRESS AN2135SC or CYPRESS AN2136SC, which
helps run faster and more stable than any other versions.
Lessons Learned:
- Issues faced:
Connected to the car and four lights are lit Prompted for
this content: 5800 window, units of measurement appear 104 Error 5800: Please
check the power supply is connected, the normal connection indicator light red
flashes. If it is any problem of these two situations: reconnect, wait about 10
seconds before verification.
- Solutions:
1) The installed
software can’t
run in your computer system stably, there is no communication between the
software and the device.
2) The computer USB
interface does not work, try to use another one.
Recommendations:
Renault can clip
Windows XP
Renault can clip
ebay?...maybe not for CAN CLIP!
Renault can
clip ebay?
CAN CLIP
Renault unit
Renault clip
diagnostic software download (Hot!!!!!!)
Renault clip language
Renault clip adds a new
language: Serbian Croatian
Renault can
clip windows 7 64 bit? (Hot!!!!!!!!!!)
Renault can
clip tutorial of CLIP
installation
CAN CLIP
firmware update at 20% (solved)
Renault can
clip diagnostics & reprogramming
Renault can
clip car list
How to
re-programming ecu by CLiP
Renault clip
programming mode asks for 7 digit serial
Where to
download and save data
CAN Clip VS Multidiag Pro VS DDT2000
Renault CLIP
running with Nissan Consult
3?
Repair flash ISO & CAN BDM chip
CAN CLiP ISO LED not light up (solved)
Clip RLT 2002 Probe “Failure of reservation of probe” (solved)
Renault CAN
CLIP reviews
Renault can
clip user manual
Conclusion:
Renault clip diagnostic software v168 is 100% no issues to use!
没有评论:
发表评论